Max-Age - Dell Z9500 Command Reference Manual

Defaults 2 seconds
Command SPANNING TREE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.5.1.0
6.2.1.1
Related
forward-delay
Commands
state.

max-age

information.
max-age
To maintain configuration information before refreshing that information, set the time interval for the
spanning tree bridge.
Z9500
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
seconds
Defaults 20 seconds
1774
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— changes the wait time before STP transitions to the Forwarding
— changes the wait time before STP refreshes protocol configuration
Enter a number of seconds the system waits before
refreshing configuration information. The range is from 6 to
40. The default is 20 seconds.
Spanning Tree Protocol (STP)