Show Clock - Dell Z9500 Command Reference Manual

Usage The number parameter in the ntp trusted-key command must be the same
Information
number as the number parameter in the ntp authentication-key command. If
you change the ntp authentication-key command, you must also change the
ntp trusted-key command.
Related
ntp authentication-key
Commands
ntp authenticate

show clock

Display the current clock settings.
Z9500
Syntax
show clock [detail]
Parameters
detail
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Example
Dell#show clock
11:05:56.949 UTC Thu Oct 25 2001
Dell#
1798
— sets an authentication key for NTP.
— enables the NTP authentication parameters you set.
(OPTIONAL) Enter the keyword detail to view the source
information of the clock.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
System Time and Date