Show Storm-Control Unknown-Unicast - Dell Z9500 Command Reference Manual

Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
7.6.1.0
Example
Dell#show storm-control multicast tengigabitethernet 1/0
Multicast storm control configuration
Interface
-----------------------------------------
Te 1/0

show storm-control unknown-unicast

Display the storm control unknown-unicast configuration.
Z9500
Syntax
show storm-control unknown-unicast [interface]
Parameters
interface
1760
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/ port information.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Direction
Ingress
(OPTIONAL) Enter one of the following interfaces to display
the interface specific storm control configuration:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
Packets/Second
5
Storm Control