Power Button - Oracle X5-2L Service Manual

Power Down the Server for Immediate Shutdown Using the Power Button
2. Disconnect the power cords and data cables from the server.
See "Disconnect Cables From the Server" on page
Caution -
power mode. Power is still directed to the service processor remote management subsystem and
power supply fans. To completely power off the server, you must disconnect the power cords
from the power supplies.
Related Information
"Server System-Level Status Indicators" on page 31
■
"Power Down the Server Gracefully Using the Oracle ILOM CLI" on page 55
■
"Power Down the Server Gracefully Using the Oracle ILOM Web Interface" on page 56
■
"Power On the Server" on page 233
■
Power Down the Server for Immediate Shutdown Using the

Power Button

Caution -
system data during an immediate power-down, so use this procedure to power down the server
only after attempting the graceful power-down procedure.
1. Press and hold the Power button for four seconds to force the main power off
and to enter standby power mode.
When main power is off, the Power/OK LED on the front panel begins flashing, indicating that
the server is in standby power mode. See
Disconnect the power cords and data cables from the server.
2.
See "Disconnect Cables From the Server" on page
Caution -
power mode. Power is still directed to the service processor remote management subsystem and
power supply fans. To completely power off the server, you must disconnect the power cords
from the power supplies.
Related Information
"Server System-Level Status Indicators" on page 31
■
"Power Down the Server for Immediate Shutdown Using the Oracle CLI" on page 59
■
"Power Down the Server for Immediate Shutdown Using the Oracle ILOM Web
■
Interface" on page 59
58 Oracle Server X5-2L Service Manual • May 2015
When you power down the server using the Power button, the server enters standby
This procedure quickly forces the server main power off. You might corrupt your
When you power down the server using the Power button, the server enters standby
60.
"Server System-Level Status Indicators" on page
60.
31.