Oracle X5-2L Service Manual page 203

Removing the Disk Cage Assembly From the Server Chassis
FIGURE 74
6. Slide the disk cage assembly forward, and then gently lift the disk cage
assembly from the chassis [3].
Set the disk cage assembly on an anti-static mat.
7. Remove the right LED/USB indicator module.
a. Remove the two No. 2 Phillips screws that secure the LED/USB indicator
module to the server front panel [1].
If present, remove the capping tape that secures the cable to the side of the disk cage
assembly.
Remove the Right LED/USB Indicator Module
Servicing FRUs 203