Oracle X5-2L Service Manual page 77

Removing a Storage Drive
FIGURE 16
Consider your next steps:
6.
If you are replacing the drive, continue to
■
Drive" on page
If you are not replacing the drive, install a filler panel in the empty drive slot to maintain
■
proper airflow and perform administrative tasks to configure the server to operate without
the drive.
For information on how to install a storage drive filler panel, see
Panels" on page
Related Information
"Storage and Boot Drive Indicators" on page 32
■
"Storage Drives Hot-Plug Conditions" on page 72
■
"Storage Drive Failure and RAID" on page 72
■
"Install an HDD or SSD Storage Drive" on page 78
■
"Install a Rear Storage Drive" on page 88
■
78.
226.
Servicing CRUs That Do Not Require Server Power-Off
Remove an HDD or SSD Storage Drive
"Install an HDD or SSD Storage
"Remove and Install Filler
77