BIOS Exit Menu Selections
Setup Options
Persistent Boot Support
OSA Configuration
OSA Internal Support
Note -
This option is
nonfunctional if the server does
not have an OSA USB flash drive
installed.
Legacy Boot Option Priority
Related Information
"BIOS Main Menu Selections" on page 269
■
"BIOS Advanced Menu Selections" on page 273
■
"BIOS IO Menu Selections" on page 285
■
"BIOS Exit Menu Selections" on page 290
■
BIOS Exit Menu Selections
This section includes a screenshot of the BIOS Exit Menu. The options that are available from
the Exit Menu are described in the table that follows.
290
Oracle Server X5-2L Service Manual • May 2015
Options
Disabled/Enabled
Disabled/Enabled
UEFI/Legacy
Defaults
Disabled
Enabled
Legacy
Description
all PXE attempts have failed. If set to
disabled, the system halts and displays
the error message "Network Boot Failed"
when all PXE boots failed. If set to Boot
List, fail over to the main Boot Options
Priority list.
If enabled, the Persistent Boot feature is
enabled. If disabled, system reverts back
to the default boot handling from the next
boot.
Configure whether the operating system
recognizes Oracle System Assistant at
boot.
Enable or disable the OSA flash drive's
USB port.
Displays the system boot order.
Need help?
Do you have a question about the X5-2L and is the answer not in the manual?