Disconnect Cables From The Server - Oracle X5-2L Service Manual

Table of Contents

Advertisement

Disconnect Cables From the Server

1.
Log in to the Oracle ILOM web interface using an Administrator account.
The Oracle ILOM web interface System Information → Summary Information page appears.
2.
In the left pane, click Host Management → Power Control, and click Immediate
Power Off in the Select Action list.
3.
Click Save, and then click OK.
The server powers down immediately.
Disconnect the power and data cables from the server.
4.
See
"Disconnect Cables From the Server" on page
Caution -
power mode. Power is still directed to the service processor remote management subsystem and
power supply fans. To completely power off the server, you must disconnect the power cords
from the power supplies.
Related Information
"Power Down the Server for Immediate Shutdown Using the Power Button" on page 58
"Power Down the Server for Immediate Shutdown Using the Oracle CLI" on page 59
"Power On the Server" on page 233
Disconnect Cables From the Server
Caution -
powered off.
Label all cables connected to the server.
1.
2.
Power down the server.
See
"Powering Down the Server" on page
3.
Disconnect the power cords from the rear of the server.
4.
Disconnect all data cables from the rear of the server.
If your rackmount kit includes a cable management device, remove the cables
5.
from it.
60
Oracle Server X5-2L Service Manual • May 2015
When you power down the server using Oracle ILOM, the server enters standby
The system supplies standby power to the circuit boards even when the system is
60.
55.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X5-2L and is the answer not in the manual?

Table of Contents