Select Legacy Bios Or Uefi Bios Boot Mode - Oracle X5-2L Service Manual

A message appears prompting you to continue this operation by selecting OK or to cancel
the operation by selecting Cancel.
b. In the message, highlight OK, and then press Enter.
The BIOS Setup Utility screen appears with the cursor highlighting the first value on the
screen.
4. Press the F10 key to save the changes and exit the BIOS Setup Utility.
Alternatively, you can save the changes and exit the BIOS Setup Utility by navigating to the
Save & Exit Menu and selecting Save Changes and Reset.
Related Information
"Access BIOS Setup Utility Menus" on page 243
■
"BIOS Setup Utility Menus" on page 242
■
"BIOS Key Mappings" on page 243
■

Select Legacy BIOS or UEFI BIOS Boot Mode

The BIOS firmware supports both Legacy BIOS BOOT Mode and UEFI BIOS Boot Mode.
The default setting is Legacy BIOS Boot Mode. For more information about selecting the BIOS
boot mode, refer to
1. Access the BIOS Setup Utility menus.
See "Access BIOS Setup Utility Menus" on page
2.
From the BIOS Main Menu screen, select Boot.
The Boot Menu screen appears.
3.
From the Boot Menu screen, use the up and down arrow keys to select UEFI/
Legacy BIOS Boot Mode, and then press Enter.
"Using UEFI" on page 246.
Select Legacy BIOS or UEFI BIOS Boot Mode
243.
Setting Up BIOS Configuration Parameters 251