Oracle X5-2L Service Manual page 151

Cable part number 7064127 is required to connect the auxiliary signal to the storage
Note -
drive backplane.
b. If the server has a DVD drive, reconnect the power and DVD data
connections to the storage drive backplane [4].
See "Install the DVD Drive" on page
Cable part number 7064128 is required to connect DVD power and data to the storage
Note -
drive backplane.
c. Reconnect the power cable to the storage drive backplane [5].
Cable part number 7064125 is required to connect power to the storage drive backplane.
Note -
If present, reconnect the two optional NVMe cables to the storage drive
d.
backplane [5].
To ensure proper NVMe cable connections, see
e. Reconnect the two SAS cables to the storage drive backplane from the
Oracle Storage 12 Gb/s SAS PCIe RAID HBA [6].
To ensure proper SAS cable connections, see
Cables" on page
4. Return the server to operation.
a. If removed, install the fan modules.
See "Install a Fan Module" on page
b. Install the disk cage cover, and close the fan assembly door.
See "Install the Disk Cage Cover" on page
Install all storage drives into the storage cage.
c.
See "Install an HDD or SSD Storage Drive" on page
Return the server to the normal rack position.
d.
See "Return the Server to the Normal Rack Position" on page
e. Reconnect the power cords to the power supplies, and power on the server.
Install the Storage Drive Backplane for Eight-Drive Systems
190.
171.
92.
"Install NVMe Cables" on page
"Install SAS Storage Drive
229.
78.
231.
177.
Servicing FRUs 151