Install A Processor - Oracle X5-2L Service Manual

Install a Processor

Install a Processor
Caution -
install a processor; otherwise, the processor or the processor socket might be damaged. For
information on how to select the correct processor removal and replacement tool, see
the Correct Processor Removal and Replacement Tool" on page
Caution -
very fragile. A light touch can bend the processor socket pins beyond repair. Always use the
processor removal and replacement tool to remove and replace the processor.
Attach an antistatic wrist strap to your wrist, and then to a metal area on the
1.
chassis.
See "Take Antistatic Measures" on page
Unpack the replacement processor, and place it on an antistatic mat.
2.
Ensure that the replacement processor is identical to the failed processor that
3.
was removed.
For a description of the processors that are supported by the server, refer to
Components" in "Oracle Server X5-2L Installation Guide
4. Ensure that the two processor ILM assembly levers and the ILM assembly load
plate are in the fully open position.
For instructions for opening the processor ILM assembly levers and the load plate, see
through
5. To install the replacement processor into the processor removal and
replacement tool, acquire the tool and perform the following steps.
Caution -
processor removal and replacement tool. For information on how to select the correct processor
removal and replacement tool, see
Tool" on page
Press the button in the center of the tool to the down position [1].
a.
b. Turn the tool upside down, grasp the processor by its front and back edges
and position the processor (circuit side up) in the tool so that the triangle
on the corner of the processor aligns with the triangle on the side of the
processor removal and replacement tool [2].
140 Oracle Server X5-2L Service Manual • May 2015
The correct color-coded processor removal and replacement tool must be used to
Be careful not to touch the processor socket pins. The processor socket pins are
Step 8 of "Remove a Processor" on page
Before installing the processor, ensure that you are using the correct color-coded
130.
64.
".
134.
"Selecting the Correct Processor Removal and Replacement
"Selecting
130.
"Server
Step 6