Remove A Pcie Card - Oracle X5-2L Service Manual

5
PCIe slot 5
6
PCIe slot 6 (Primary slot for the Oracle Storage 12 Gb/s SAS PCIe RAID HBA card)
All of the PCIe slots comply with the PCI Express 3.0 specification and can
Note -
accommodate 25 Watt PCIe3 cards.
Related Information
"Remove a PCIe Card" on page 117
■
"Install a PCIe Card" on page 119
■

Remove a PCIe Card

PCIe slots 1, 2, and 3 are nonfunctional in single-processor systems.
Note -
Prior to replacing or installing a PCIe card, refer to the card documentation for specific
Note -
installation and cabling instructions.
1. Prepare the server for service.
a. Power off the server and disconnect the power cords from the power
supplies.
See "Powering Down the Server" on page
b. Extend the server to the maintenance position.
See "Extend the Server to the Maintenance Position" on page
c. Attach an antistatic wrist strap.
See "Electrostatic Discharge Safety" on page
Remove the server top cover.
d.
See "Remove the Server Top Cover" on page
e. Swivel the air baffle into the upright position to allow access to PCIe cards.
2. Locate the PCIe card that you want to remove.
55.
61.
52.
64.
Servicing CRUs That Require Server Power-Off
Remove a PCIe Card
117