Oracle X5-2L Service Manual page 95

Power Supplies and Latches Locations
FIGURE 23
Figure Legend
1
Power supply 0
2
Power supply 1
A lit amber Service Required LED on a power supply indicates that a failure was detected.
You can also use the Oracle ILOM show faulty command at the Oracle ILOM command-line
prompt (->) to identify a power supply failure.
Alternatively, to list all known faults in the server, log into the Oracle Solaris OS and issue
the fmadm faulty command, or log into the Oracle ILOM service processor from the Oracle
ILOM Fault Management Shell and issue the fmadm faulty command. For more information
about how to use the Oracle ILOM Fault Management Shell and supported commands, see the
Oracle ILOM User's Guide for System Monitoring and Diagnostics Firmware Release 3.2.x in
the Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library at
oracle.com/goto/ILOM/docs.
The fans of a failed power supply might still be spinning when the system is powered on.
Note -
The fans will stop spinning when you disconnect the power cords.
Servicing CRUs That Do Not Require Server Power-Off
Remove a Power Supply
http://www.
95