Server Fan Status Indicators - Oracle X5-2L Service Manual

Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface
Icon
Status
Indicator
Name
Rear Power Rear
Supply Fault
System Over
Temperature
Warning

Server Fan Status Indicators

Each fan module has one status indicator (LED). The LEDs are located on the chassis mid-
wall adjacent to and aligned with the fan modules and are visible when the top cover fan door is
open.
TABLE 2 Server Fan Status Indicators
Status Icon
Indicator
Name
Fan Status None
Storage and Boot Drive Indicators
There are three status indicators (LEDs) on each drive.
Server Front Storage and Boot Disk Drive Indicators
TABLE 3
Status Icon
Indicator Name
OK/Activity
Service
Required
32 Oracle Server X5-2L Service Manual • May 2015
Color State and Meaning
Amber Indicates that one of the server power supplies has failed.
■ OFF – Indicates steady state; no service is required.
■ STEADY ON – Indicates service required; service the power supply.
Amber Indicates a warning for an overtemperature condition.
■ OFF – Normal operation; no service is required.
■ STEADY ON – The system is experiencing an overtemperature warning condition.
Note - This is a warning indication, not a fatal overtemperature. Failure to correct this might
result in the system overheating and shutting down unexpectedly.
Color State and Meaning
Amber ■ Off – The fan module is correctly installed and operating within specification.
■ Amber – The fan module is faulty. The front TOP FAN LED and the front and rear
panel Service Required LEDs are also lit if the system detects a fan module fault.
Color State and Meaning
Green ■ OFF – Power is off or installed drive is not recognized by the system.
■ STEADY ON – The drive is engaged and is receiving power.
■ RANDOM BLINKING – There is disk activity. Status indicator LED blinks on and off to
indicate activity.
Amber ■ OFF – The storage drive is operating normally.
■ STEADY ON – The system has detected a fault with the storage drive.
†