Table of Contents
Advertisement
FIGURE 51
b.
If present, disconnect the two optional NVMe cables from the storage drive
backplane [2].
c.
Disconnect the SAS cable from the storage drive backplane to the rear-
mounted storage drives, and the two SAS cables from the storage drive
backplane to the Oracle Storage 12 Gb/s SAS PCIe RAID HBA [3].
Note the cable connections in order to ease proper reconnection of the cables.
4.
Using a No. 2 Phillips screwdriver, loosen the two spring-mounted screws that
secure the storage drive backplane to the chassis [4].
5.
Lift the storage drive backplane up to release it from the standoff hooks [4].
Remove the Storage Drive Backplane for Twenty-Four Drive Systems
Removing the Storage Drive Backplane for Twenty-Four Drive Systems
Servicing FRUs
159
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the X5-2L and is the answer not in the manual?
Questions and answers