Serial Management Port - Oracle X5-2L Service Manual

TABLE 14
Pin
1
2
3
4
Related Information
"Rear Panel Components and Cable Connections" on page 18
■
"Server System-Level Status Indicators" on page 31
■
"Disconnect Cables From the Server" on page 60
■
"Reconnect Power and Data Cables" on page 233
■

Serial Management Port

The serial management connector (labeled SER MGT) is an RJ-45 connector that can be
accessed from the rear panel. This port is the default connection to the server. Use this port only
for server management.
TABLE 15
Parameter
Connector
Rate
Parity
Stop bits
Data bits
The following figure and table describe the SER MGT port pin signals.
Network Management Port Signals
Signal Description
Transmit Data +
Transmit Data –
Receive Data +
Common Mode Termination
Default Serial Connections for Serial Port
Pin Signal Description
5 Common Mode Termination
6 Receive Data –
7 Common Mode Termination
8 Common Mode Termination
Setting
SER MGT
9600 baud
None
1
8
Identifying the Server Ports
Serial Management Port
237