Oracle X5-2L Service Manual page 75

Drive Location and Numbering on a Server With Twenty-Four 2.5-Inch Drives
FIGURE 14
Figure Legend
1
Storage drives 0 through 11 (HDD/SSD; Storage drives 3 and 4: HDD/SSD/NVMe)
2
Storage drives 12 through 23 (HDD/SSD; Storage drives 19 and 20: HDD/SSD/NVMe)
3. If you are removing an HDD or SSD storage drive, type the required operating
system commands to stop the server from using the drive; otherwise, proceed to
the next step.
The exact commands required depend on the configuration of your drives. Unmount file
systems, or issue RAID commands as needed.
The blue OK to Remove status indicator LED on the drive may or may not light, as
Note -
support for this varies depending on the operating system in use.
On the drive you plan to remove, push the latch release button to open the drive
4.
latch [1, 2].
Remove an HDD or SSD Storage Drive
Servicing CRUs That Do Not Require Server Power-Off 75