Table of Contents
Advertisement
Setup Options
TPM Active Status
TPM Owner Status
BIOS Advanced Menu Network Stack Options
The following table describes the BIOS Advanced Menu network stack options.
BIOS Advanced Menu Network Stack Options
TABLE 30
Setup Options
Network Stack
Ipv4 PXE Support
Ipv6 PXE Support
BIOS Advanced Menu BMC Network Configuration
Options
The following table describes the BIOS Advanced Menu BMC network configuration options.
BIOS Advanced Menu BMC Network Configuration Options
TABLE 31
Setup Options
Current Active Management
Port (R/O)
Refresh
Options
Deactivated/Activated
Owned/Unowned
Options
Disabled/Enabled
Disabled/Enabled
Disabled/Enabled
Options
NA
NA
Defaults
Deactivated
Unowned
Defaults
Enabled
Enabled
Disabled
Defaults
NETMGT
NA
BIOS Setup Utility Menu Options
BIOS Advanced Menu Selections
Description
Note -
This option is available
only if TPM Support is set to
enabled.
Use this option to provide the
current capability state of the
security device.
Note -
This option is available
only if TPM Support is set to
enabled.
Use this option to provide the
current ownership state.
This option is available
Note -
only if TPM Support is set to
enabled.
Description
Enable or disable the UEFI
network stack.
Enable or disable IPv4 PXE
Boot support. If disable, the
IPv4 Boot Option will not be
created.
Enable or disable IPv6 PXE
Boot support. If disable, the
IPv6 Boot Option will not be
created.
Description
The currently active
management port.
Refresh current BMC LAN
information with the latest
279
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the X5-2L and is the answer not in the manual?