Oracle X5-2L Service Manual page 166

Install the Storage Drive Backplane for Rear-Mounted Storage Drives
FIGURE 54
2. Using a No. 2 Phillips screwdriver, install and tighten the two screws to secure
the storage drive backplane to the storage drive cage [3].
3. Reconnect the cables to the storage drive backplane [4].
Reconnect the power cable to the storage drive backplane.
a.
Note -
backplane.
166 Oracle Server X5-2L Service Manual • May 2015
Installing the Storage Drive Backplane for Rear-Mounted Storage Drives
Cable part number 530-4037-01 is required to connect power to the rear storage drive