Oracle X5-2L Service Manual page 27

Related Information
See "Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface" on page 27
■
Troubleshoot Hardware Faults Using the Oracle ILOM Web
Interface
The screens shown in this procedure might differ from those for your server.
Note -
This procedure uses the basic troubleshooting steps described in
Process" on page 26.
Use this procedure to troubleshoot hardware faults with the Oracle ILOM web interface and, if
necessary, prepare the server for service.
This procedure provides one basic approach to troubleshooting hardware faults. It
Note -
uses a combination of the Oracle ILOM web interface and command-line interface (CLI).
However, the procedure can be performed using only the Oracle ILOM CLI interface. For
more information about the Oracle ILOM web interface and CLI, refer to the Oracle ILOM
documentation.
Before beginning this procedure, obtain the latest version of the Oracle Server X5-2L Product
Notes.
1. Log in to the server SP Oracle ILOM web interface.
Open a browser and direct it using the IP address of the server SP. Enter a user name (with
administrator privileges) and password at the log-in screen. The Summary Information screen
appears.
The Status section of the Summary Information screen provides information about the server
subsystems, including:
Processors
■
Memory
■
Power
■
Cooling
■
Storage
■
Networking
■
Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface
"Basic Troubleshooting
Troubleshooting and Diagnostics 27