Power Off The Server Using The Server Os; Power Off, Graceful (Power Button) - Oracle X5-8 Service Manual

"Power Off, Graceful (Power Button)" on page 101
■
"Power Off, Immediate (Power Button)" on page 102
■
"Power Off, Remote (Oracle ILOM CLI)" on page 103
■
"Power Off, Remote (Oracle ILOM Web Interface)" on page 104
■
"Remove Power" on page 105
■
"Power Modes, Shutdowns, and Resets" on page 107
■

Power Off the Server Using the Server OS

If the server operating system (OS) is running, you can use its shutdown procedure to power off
the server to standby power mode. The procedure provides a graceful shutdown of the server.
See: "Power Modes, Shutdowns, and Resets" on page 107
Before You Begin
To power off the server, use the OS-specific shutdown procedure.
1.
2. Verify that the server is in standby power mode.
When the server is in standby power mode, the SP indicator is on steady, and the Power OK
indicator blinks at the single blink rate (a quick flash every three seconds).
"Performing Electrostatic Discharge and Static Prevention Measures" on page 90
Next Steps ■

Power Off, Graceful (Power Button)

Note -
panel.
Use this procedure when you are at the server to perform a graceful power off of the server to
standby power mode.
See: "Power Modes, Shutdowns, and Resets" on page 107
Before You Begin
1. To power off the server, press and quickly release the front panel Power button.
This procedure is performed locally and requires physical access to the server front
Power Off the Server Using the Server OS
Preparing for Service 101