Power Off The Server Using The On/Standby Button; Power On The Server Using The On/Standby Button - Oracle X7 series Administration Manual

"Power the Server Off or On (Oracle ILOM)" on page 44
■

Power Off the Server Using the On/Standby button

Locate the On/Standby button on the server front panel.
1.
Refer to the server installation guide for the location of the Power button.
The On/Standby button is recessed on most systems.
Note -
2. Use a stylus or other pointed, non-conducting object to press the Power button.
To perform a graceful shutdown, press and quickly release the On/Standby
■
button.
To perform an immediate shutdown, press and hold the On/Standby button
■
for at least 5 seconds.
Data loss. An immediate shutdown abruptly closes all applications and files without
Caution -
saving changes.
The server enters Standby power mode.
To completely power off the server, you must disconnect the power cords from the
Caution -
back panel of the server.

Power On the Server Using the On/Standby button

1. Ensure that the power supplies are connected to a power source.
2. Verify that the server is in Standby power mode.
See "Server Power State Overview" on page
Locate the On/Standby button on the front panel of the server.
3.
Refer to the server installation guide for the location of the Power button.
The On/Standby button is recessed on most systems.
Note -
Power Off the Server Using the On/Standby button
41.
Controlling the Server Power State 43