Oracle X5-2L Service Manual page 131

For instructions, refer to the Oracle Integrated Lights Out Manager (ILOM) 3.2
Documentation Library at http://www.oracle.com/goto/ILOM/docs.
Visually check the size of the processor installed in the server.
■
This requires that you remove the processor heatsink and open the processor independent
loading mechanism (ILM) assembly that holds the processor in the socket. For instructions,
see "Remove a Processor" on page
when you remove the processor.
If you choose to visually check the size of the processor, refer to the next two figures to see
how to distinguish the smaller processors from the larger processors.
smaller processor installed. Notice that the right and left edges of the processor are within the
boundaries of the processor alignment brackets.
Smaller Processor Installed in a Motherboard Processor Socket
FIGURE 39
Figure Legend
1
Processor alignment brackets
2
Processor left and right edges are within alignment bracket boundaries
134. This is the same procedure that you will use
Servicing Processors (FRU)
Figure 39 shows the
Servicing FRUs 131