Power Off The Host Using The Power Button - Oracle X7-2 Installation Manual

Power Off the Host Using the Power Button

Power
State
Main power
For instructions on powering the host off and on, see the following procedures:
"Power Off the Host Using the Power Button" on page 120
■
"Power On the Host Using the Power Button" on page 121
■
"Power the Host On and Off Using Oracle ILOM" on page 121
■
Power Off the Host Using the Power Button
1. Locate the Power button on the server front panel.
2. Press the Power button.
To perform a graceful shutdown, press and release the Power button.
■
ACPI-enabled operating systems perform an orderly shutdown. Operating systems that are
not ACPI-enabled might ignore this event and fail to shut down the host.
The System OK indicator blinks. The service processor SP OK indicator is steady on.
To perform an immediate shutdown, press and hold the Power button for at
■
least 5 seconds.
The System OK indicator blinks. The service processor SP OK indicator is steady on.
Caution -
saving changes.
To completely power off the server, disconnect the power cords from the
■
back panel of the server.
120 Oracle Servers X7-2 and X7-2L Installation Guide • October 2017
Description
When you power on the
host, the server enters
Main power mode.
Data loss. An immediate shutdown abruptly closes all applications and files without
Indicators Action
Caution -
loss, prepare the operating system for
shutdown before you immediately power
off.
The green System OK Use Oracle ILOM or the Power button to
indicator is steady on. apply host power.
Data loss. To prevent data