Pcie Slot Locations - Oracle X5-2L Service Manual

Servicing PCIe Cards (CRU)
Caution -
PCIe cards. You must disconnect all power cables from the system before performing these
procedures.
Note -
Notes at http://www.oracle.com/goto/X5-2L/docs.
This section covers the following procedures:
"PCIe Slot Locations" on page 116
■
"Remove a PCIe Card" on page 117
■
"Install a PCIe Card" on page 119
■
Related Information
"Servicing the Oracle Storage 12 Gb/s SAS PCIe RAID HBA Card (FRU)" on page 180
■

PCIe Slot Locations

There are six PCIe slots available for optional PCIe cards. The following figure shows the PCIe
slot numbering.
FIGURE 33
Figure Legend
1
PCIe slot 1 (PCIe slot 1 is nonfunctional in single-processor systems.)
2
PCIe slot 2 (PCIe slot 2 is nonfunctional in single-processor systems.)
3
PCIe slot 3 (PCIe slot 3 is nonfunctional in single-processor systems. Primary slot for the optional Oracle PCIe
NVMe switch card)
4
PCIe slot 4
116 Oracle Server X5-2L Service Manual • May 2015
Ensure that all power is removed from the server before removing or installing
For a complete list of supported PCIe cards, refer to the Oracle Server X5-2L Product
PCIe Slot Locations