Oracle X5-2L Service Manual page 212

Remove the Motherboard Assembly
8. Disconnect the auxiliary signal cable from the motherboard to the front storage
drive backplane [2].
See "Servicing the Front and Rear Storage Drive Backplanes (FRU)" on page
9. Disconnect the power cable from the motherboard to the front storage drive
backplane [2].
See "Servicing the Front and Rear Storage Drive Backplanes (FRU)" on page
10. Disconnect the signal cable from the server intrusion switch [2].
11. Remove the mid-wall from the chassis.
Using a hex/flat head screwdriver, remove the screw on each side of the
a.
chassis that secures the mid-wall to the chassis [3].
212 Oracle Server X5-2L Service Manual • May 2015
146.
146.