Table of Contents
Advertisement
Installing the Disk Cage Assembly in the Server Chassis
FIGURE 71
3.
Reconnect the left LED indicator module cable and the right LED/USB indicator
module cable to the motherboard [2 and 3].
Reconnect all cables to the front storage drive backplane.
4.
See the procedures for your storage drive configuration in
Storage Drive Backplanes (FRU)" on page
5.
Install the fan modules in the server.
See
"Install a Fan Module" on page
6.
Depending on your server's storage drive configuration, do one of the following:
"Servicing the Front and Rear
146.
92.
Install the Left LED Indicator Module
Servicing FRUs
199
Advertisement
Table of Contents
Troubleshooting
