Oracle X5-2L Service Manual page 215

13. Remove the following reusable components from the motherboard and install
them onto the replacement motherboard.
DDR4 DIMMs
■
See "Identify and Remove a Faulty DIMM" on page 109
DIMM" on page
Note - Install the DDR4 DIMMs only in the slots (connectors) from which they were
removed. Performing a one-to-one replacement of DIMMs significantly reduces the
possibility that DIMMs will be installed in the wrong slots. If you do not reinstall the
DIMMs in the same slots, server performance might be reduced and some DIMMs might
not be used.
USB flash drives
■
See "Remove an Internal USB Flash Drive" on page 122
Drive" on page
Remove the processors from the failed motherboard.
14.
See "Remove a Processor" on page
15. Remove the processor socket covers from the replacement motherboard and
install the processors.
a. Disengage the processor Independent Loading Mechanism (ILM) assembly
hinge lever on the right side of the processor socket (viewing the server
from the front) by pushing down on the lever and moving it to the side away
from the processor, and then rotating the lever upward [1].
113.
124.
134.
Remove the Motherboard Assembly
and "Install a
and "Install an Internal USB Flash
Servicing FRUs 215