Install A Processor Module Or Processor Filler Module - Oracle SPARC T5-4 Service Manual

Install a Processor Module or Processor Filler Module

b.
c.
■ If you are adding a second processor module to the server, return to
Upgrade Process" on page
Related Information
"Processor Module Components" on page 18
■
"Processor Module LEDs" on page 60
■
"Server Upgrade Process" on page 57
■
"Determine Which Processor Module Is Faulty" on page 61
■
"Servicing DIMMs" on page 69
■
"Install a Processor Module or Processor Filler Module" on page 64
■
"Verify the Processor Module" on page 67
■
Install a Processor Module or Processor Filler Module
Processor modules are cold-service components that can be replaced only by qualified
service personnel. For the location of the processor modules, see
Components" on page
Caution -
discharge. This discharge can cause failure of server components.
1. Determine your first step:
■ If you are installing a processor module after replacing or installing DIMMs,
go to
■ If you are installing a new processor module to replace a faulty one, install
all of the DIMMs that you removed from the faulty processor module into the
replacement module. See
2. Open the latches on the processor module or processor filler module, and insert
the module into the empty processor module slot in the server.
64 SPARC T5-4 Server Service Manual • July 2016
Install the DIMMs into the new processor module.
See "Install a DIMM" on page
Install the processor module.
See "Install a Processor Module or Processor Filler Module" on page
14.
This procedure requires that you handle components that are sensitive to electrostatic
Step 2.
79.
57.
"Install a DIMM" on page
64.
"Server
"Front Panel
79.