Remove A Pcie Card - Oracle X8-2L Service Manual

Related Information
"Remove a PCIe Card" on page 135
■
"Install a PCIe Card" on page 137
■

Remove a PCIe Card

PCIe slots 1 through 5 are nonfunctional in single-processor systems.
Note -
Note - Prior to replacing or installing a PCIe card, refer to the card documentation for specific
installation and cabling instructions.
1. Prepare the server for service.
Power off the server and disconnect the power cords from the power
a.
supplies.
See "Powering Down the Server" on page
b. Extend the server to the maintenance position.
See "Extend the Server to the Maintenance Position" on page
c. Attach an antistatic wrist strap.
See "Take Antistatic Measures" on page
Remove the server top cover.
d.
See "Remove the Server Top Cover" on page
2. Locate the PCIe card that you want to remove.
See "PCIe Slot Locations" on page
3. If necessary, record where the PCIe cards are installed.
4. Unplug all data cables from the PCIe card [1].
Note the cable connections in order to ease proper reconnection of the cables.
55.
65.
65.
134.
Remove a PCIe Card
62.
Servicing PCIe Cards (CRU) 135