Sensor (Pick Roll Position Hp) Removal - Lexmark X850e Service Manual

Sensor (pick roll position HP) removal

1.
Open the ADF left cover assembly.
2.
Remove the ADF left cover media guide. See
3.
Disconnect the connector from the sensor (pick roll position HP) (A).
4.
Release the hooks securing sensor (pick roll position HP) (A) to the ADF left cover assembly (B).
5.
Remove the sensor (pick roll position HP) (A).
B
"ADF left cover media guide removal" on page
7500-XXX
4-181.
Connector
A
Repair information
4-177