Sensor (Registration) Late Jam (Feeding From The Mpf) - Lexmark X95x series Service Manual

Step Action and questions
Check the media transport/MPF
6
drive motor for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Tray [x] feed/lift motor
(pick)
5. Touch Tray [x] feed/lift motor
(feed).
Does the above component
operate properly?
Check the media feed/lift motor
7
for proper connection.
Is the above component
properly connected?
POR the machine, and perform a
8
PRINT test.
Go to
"PRINT TESTS" on
page 3-25.
Does the error continue?
POR the machine, and perform a
9
PRINT test.
Go to
"PRINT TESTS" on
page 3-25.
Does the error continue?

200.03 Sensor (registration) late jam (feeding from the MPF)

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Yes
Go to step 8.
Replace the media feed lift motor.
Go to
"Media feed lift motor
removal" on page 4-121.
Replace the lower engine PCBA.
Go to
"Lower engine PCBA
removal" on page 4-104.
Replace the upper printer engine
PCBA.
Go to
"Upper printer engine
PCBA removal" on page 4-186.
Yes
Go to step 2.
7558-xxx
No
Go to step 7.
Replace the connection.
Problem resolved
Problem resolved
No
Remove any media or media
fragments.
Diagnostic information
Previous
Next
Go Back
2-91