Sensor (Tray 2 Feed Out) Late Jam; Sensor (Tray 2 Feed Out) Late Jam (80K Interval Exceeded For Feed Rolls) - Lexmark C950 Service Manual

Step Action and questions
Check the tray module upper
7
transport motor for proper
connection.
Is the above component
properly connected?
POR the machine, and perform a
8
print test. Go to
"PRINT TESTS"
on page 3-22.
Does the error continue?
POR the machine, and perform a
9
print test. Go to
"PRINT TESTS"
on page 3-22.
Does the error continue?

242.06 Sensor (tray 2 feed out) late jam

See
"242.03/242.06 Sensor (tray 2 feed out) late jam" on page

242.56 Sensor (tray 2 feed out) late jam (80K interval exceeded for feed rolls)

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the pick/feed rollers for
2
wear.
Is the above component free of
excess wear and damage?
Check the transport rollers for
3
wear.
Is the above component free of
excess wear and damage?
Check the sensor (tray 2 feed
4
out) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (tray 2 feed
out).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Yes
Replace the tray module upper
transport motor. Go to
"Tray
module upper transport motor
removal" on page 4-211.
Replace the lower engine PCBA.
Go to
"Lower engine PCBA
removal" on page 4-98.
Replace the upper printer engine
PCBA.
Go to
"Upper printer engine
PCBA removal" on page 4-180.
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 6.
No
Replace the connections.
Problem resolved
Problem resolved
2-110.
No
Remove any media or media
fragments.
Replace the pick/feed rollers.
Go to
"Pick roller removal" on
page 4-135.
Replace the transport rollers.
Go to
"Tray module transport
rollers removal" on page
Go to step 5.
Diagnostic information
5058-030
Previous
Next
Go Back
4-210.
2-111