Setting Up The Default Properties; Using The Option Paper Feeder - Kyocera Mita FS-1050 Operation Manual

Setting Up the Default Properties

2.2 Setting Up the Default Properties
2.2.1

Using the Option Paper Feeder

This section explains how to set the option paper feeder and printer
description language using the Device Settings tab on the Properties
dialog box.
For more information about setting the printer, refer to the printer driver's
online help.
The default settings configured using the Properties dialog box will be
effective for all application software. To temporarily change the settings,
select File - Print - Properties from a Windows application. See section
Note
2.3 Printing from Windows Applications
To configure the printer default properties, you should access the printer
Properties dialog box as follows.
1
Click the Windows Start button, point to Settings, and then click
Printers.
2
Right click the Kyocera Mita FS-1050 KX icon, and click Properties.
The Properties dialog box will open. Click the Device Settings tab.
3
In the Device Options list, the Paper Feeder (cassette 1) [printer's
cassette] is selected by default. If you have installed the option paper
feeder, check the Paper Feeder (cassette 2).
2-16
on page 2-19.