Installing The Control Panel - Sony BKMA-506 Installation Manual

1-3. Installing the Control Panel

1-3. Installing the Control Panel
This section describes how to attach the control panel
(BKMA-505).
1. Remove the nine screws (B3 x 6) and remove the case
(A) in the direction of the arrow.
Case (A)
B3 x 6
B3 x 6
2. Loosen the two coin screws.
3. Connect the cable of the control panel.
n
Route the cable so that it will not contact the fan.
Coin screw
Control panel
1-2 (E)
B3 x 6
B3 x 6
B3 x 6
Fan
Coin screw
4. Attach the control panel and fasten the two coin
screws in the direction of the arrow.
Coin screws
5. Attach the case (A) in position from the front.
6. Attach the nine screws (B3 x 6) in the order shown
below.
1
5
4
3
2
1
5
4
3
BKMA-506