Door-Cabin Entry; Electronics - Regal 3760 Owner's Manual

DOOR-CABIN ENTRY

Periodically clean the lower door tracks since debris can
clog the track resulting in a door that may jerk instead of
slide to open or close. Use a vacuum or a soft damp cloth
Lubicate the latch and lock mechanism sparingly with
liquid graphite. A tube that comes with the product. Stick
the tube in the key hole and squirt in the graphite. Wipe
off any excess with a soft cloth.
Cosmetic Care & Maintenance

ELECTRONICS

Since there are no user-serviceable parts on any Raymarine
product it should be serviced only by Raymarine service
technicians.
Some products generate high voltages, and so never
handle the cables/connectors when power is being applied
to the equipment.
When powered up, all electrical equipment produces
electromagnetic fields. These can cause adjacent pieces
of equipment to interact with one another, with a
consequent adverse effect on operation. In order to
minimize these effects and enable you to get the best
possible performance from your Raymarine equipment,
guidelines are given in the installation instructions, to
enable you to ensure minimum interaction between
different items of equipment, i.e. ensure optimum
Electromagnetic Compatibility (EMC).
Always report any EMC -related problem to your nearest
Door Lock
Raymarine® dealer.
In some installations, it may not be possible to prevent
the equipment from being affected by external influences.
In general this will not damage the equipment but it can
lead to spurious resetting action, or momentarily may
result in faulty operation.
Certain atmospheric conditions may cause condensation
to form on the instrument window. This will not harm
the instrument and can be cleared up by increasing the
illumination setting.
Periodically clean your electronic display screen with a
soft damp cloth. Do not use any harsh chemicals, solvents
or abrasive materials to clean the instrument.
Door Track
31