SPOTLIGHT
The spotlight lens should be wiped with a clean, dry soft
cloth to remove any debris such as bugs, salt spray or
general dirt. Read the manufacturer's literature for more
information.
STAINLESS STEEL
Keep all stainless steel and other metal parts rinsed and
wiped dry. To maintain their finish polish the stainless
steel and other bright works at least annually. Use a good
quality auto wax to protect the stainless steel surfaces. A
soft sponge works well to apply the wax or cheese cloth.
In salty environments, rinse and wipe down stainless steel
immediately after cruising to avoid salt deposit build-up
and possible metal pitting.
Do not use harsh solvents or cleaners on stainless steel.
Do not use steel wool or wire brushes. They will damage
the finish.
14
Chapter 8