Table of Contents
Advertisement
1
2
EARLIER PASSPORT AIR CONDITIONER
CONTROL
BASIC OPERATION
Refer to the illustration above for button locations and
display functions of the Passport control.
1. POWER BUTTON- Press and release to
togglebetween the ON and OFF modes.
2. FAN BUTTON- Press to advance through the avail-
able fan settings. One through 6 refers to MANUAL FAN
SPEEDS. One is the lowest fan speed and six is the high-
est speed. The letter A indicates automatic fan opera-
tion selected.
3. FAN LED INDICATOR- The FAN indicator LED is
on when a manual fan speed is selected.
4. DOWN BUTTON- Press and release to display the
set point. Press and hold the DOWN button to decrease
the set point. Set point is decreased one degree each time
the button is depressed.
5. UP BUTTON- Momentarily press and the set point
will appear in the display. Press and release the UP but-
ton to increase the set point one degree.
4
3
5
Equipment Operation
6. HEAT MODE LED- The heat mode LED is lit when
the HEAT ONLY mode is selected or the unit is in the
heating cycle.
8
7
7. THREE DIGIT 7 SEGMENT DISPLAY- The inside
temperature is displayed when the control is on. The set
point is displayed when either UP or DOWN button is
6
pressed. The display also indicates program information
and fault codes.
When the control resumes operation after a power inter-
ruption all the display LED's will turn on for 1 second.
This is a normal operation condition and is referred to as
POWER ON RESET.
8. COOL MODE LED- The COOL mode LED is lit
when the unit is in a cooling cycle.
DUAL BUTTON FUNCTIONS
UP AND DOWN BUTTONS- Simultaneously press the
UP and DOWN buttons while in the program mode to
set new program defaults.
POWER & DOWN BUTTONS- Simultaneously press
the POWER and DOWN buttons while viewing the ser-
vice fault history log to clear the fault history log.
POWER & DOWN BUTTONS- Simultaneously press
the POWER and DOWN buttons while in the ON mode
to enter the MOISTURE mode.
LATER ELITE CONTROL
7
Advertisement
Table of Contents
Troubleshooting
