Table- Cockpit - Regal 3760 Owner's Manual

TABLE-COCKPIT
Turn T-handle
Counterclockwise
To set up the cockpit table follow these steps:
1. Open the engine compartment. Lift the table from its
designated storage area just forward of the starboard en-
gine. The table if desired for day cruising can be stored
under the circular seat.
2. Lift the forward most circular seat cushion to access
the table pedestal base.
3. Turn the T-handlle counterclockwise to release the
pedestal base. See illustration A.
4. There is a threaded plate in the cockpit floor at the
center of the circular seat where the cockpit table will be
secured. See illlustration B.
Equipment Operation
A
5. Place the pedestal base over the threaded floor plate
and rotate the T-handle clockwise until the unit is tight.
See illustration C.
145
Threaded Base Hole
Turn Clockwise To
Tighten
B
C