Flooring; Gauges/Switch Panels - Regal 3760 Owner's Manual

FLOORING

care. These products contain alcohol ingredients which
assist in drying a floor quickly. Simply spray the cleaner
on the pad and apply in a straight line back and forth
with the wood grain. Let dry. Do not use excessive
amounts of cleaner on the pad. Mist the cleaner on the
pad for even coverage.
Do not use harsh cleaners, chemicals or brushes on the
floor since they will scratch it.
Cosmetic Care & Maintenance
Always vacuum up any coarse
debris on the Cherry & Holly
flooring to prevent scratches and
embedded particles in the
flooring.
After removing large debris use
a mop with a special cover (sold
in box stores) for wood flooring

GAUGES/SWITCH PANELS

For normal dirt and dust accumulation clean with soft cloth
and warm water. Dry with soft cloth or chamois.
Near salt water environments salt deposits can build up
on the instrument bezels and faces. Use a soft damp cloth
to remove the deposits. Do not use abrasives or rough,
dirty cloths to wipe instruments.
Follow the same proceedure for all switch panels. Do not
use anyof the following on panels:
1. Lacquer Thinner
2. Dry Cleaning Fluid
3. Acetone
4. Carbon Tetrachloride
5. Benzine
6. Silicone Spray
7. Gasoline
Sometimes gauges develop condensation inside their faces.
in high humidity environments. To eliminate the
condensation droplets, energize the instrument lighting
and the heat over a short period of time will evaporate
the gauge condensation.
11