System Q; Audio Control; Speaker Setting; Speaker Type - Regal 3760 Owner's Manual

System Q

When playing different types of music this feature let's
you recall the best sounding preset.
Select the source to set by pressing the SRC button.
Select the sound type by pressing the Q button. Each
time the button is pressed the sound setting changes.
Sound Setting
Natural
Rock
Top 40
Pops
Jazz
Easy
Each setting value is changed with the speaker setting.
First, select the speaker type with the speaker setting.
When the value is set up by Audio Control "user" dis-
plays.

Audio Control

Select the source for adjustment by pressing the SRC but-
ton.
Enter the audio control mode by pressing the VOLUME
knob.
Select the audio item for adjustment by pressing the VOL-
UME knob. Each time the button is pressed the items
that can be adjusted switch as shown below:
Adjustment Item
Base level
Mid level
Treble level
Balance
Fader
Exit the audio control mode by volume control mode.
Display
"Natural"
"Rock"
"Top 40"
"Pops"
"Jazz"
"Easy"
Display Range
Bas L -8 to +8
Mid L -8 to +8
Tre L -8 to +8
Bal Left 15-Right 15
Fad Rear 15-Front 15
Equipment Operation
Audio Setup
Setting the sound system up, such as volume offset and
loudness.
Select the source for adjustment by pressing the SRC
button.
Enter the audio setup mode by pressing the VOLUME
knob for at least 1 second..
Select the audio item for adjustment by pressing the VOL-
UME knob for at least 1 second.. Each time the button
is pressed the items that can be adjusted switch as shown.
Adjustment Item
Voume Offset
Loudness
Volume offset- Sets each source's volume as a difference
from the basic volume.
Loudness- Compensates for low and high tones during
low volume. When loudness is on, loud indicator is on.
Exit audio setup by pressing the volume knob for 1 sec.

Speaker Setting

Fine tuning so that the System Q value is optimal when
setting the speaker type.
Enter stand-by by pressing the SRC button. Select the
standby display.
Enter speaker setting mode. Press the volume knob.
Select the speaker type by turning the volume knob.
Each time you turn the knob, the setting alternates
betwwn the settings shown below:

Speaker Type

OFF
For 5 by 4 speaker
For 6 by 9 speaker
For OEM speaker
Exit speaker setting mode by pressing the volume knob.
51
Display Range
V-OFF -8 to +0
Loud ON-OFF
Display
SP Off
SP 5/4
SP 69/6
SP OEM