Generator- Fault Shutdowns
The generator unit shuts down automatically under the
fault conditions on the following pages. The display panel
at the unit will show a default code.
The generator cannot be restarted until the fault condi-
tion is corrected and the controller is reset. See the shut-
down code listing on the next page.
FAULT WARNING CODES- NO SHUTDOWN
Equipment Operation
The high engine temperature switch automatically resets
when the generator cools down. However, the fault does
not clear until the controller is reset.
The controller displays a fault warning code but the gen-
erator does not shut down under the conditions shown
below in the illustration.
185