Stainless Steel - Regal 53 SC Owner's Manual

SPOTLIGHT
Read the manufacturer's literature for more information.

STAINLESS STEEL

The spotlight lens
should be wiped
with a clean, dry
soft cloth to remove
any debris such as
bugs, salt spray or
general dirt. Install
the cover to protect
the lens from salt
build-up when not
in use.
Stainless steel is an alloy made from nickel, chromium and
iron. It has been very successful in marine environments
due to its ability to resist rusting. If the stainless steel
product such as a bow rail is exposed to elements such as
ocean spray it will begin to rust over time.
If your stainless steel shows signs of rusting:
1. Wash with fresh water.
2. Clean with a good quality chrome polish periodically
but no less than annually. "Brasso" is another product
that works well.
3. Also, using a good quality wax will provide extra stain-
less steel protection.
4. For polished fi nishes that show grit lines an abrasive
such as "Scotch Brite" or sand paper can be used. Always
test a spot fi rst and "go with the grain".
Do not use harsh solvents or cleaners on stainless steel.
Do not use steel wool or wire brushes. They will damage
the fi nish.
Do not use any type of acids.
18
Chapter 8