Hlp-Serial Help; Ilf-Ils File - Christie CineLife+ 4 Series Technical Reference

HLP–Serial Help
Queries a list of all available serial commands, with brief descriptions and current enabled states.
Parameters
• Access level: None
• Power level (minimum): Power Down
Commands
Command Description
HLP? Requests entire command help listing. (Read-only)
HLP? "<command>" Requests help list for a single command. (Read-only)
Examples
Retrieve entire command help listing:
(HLP?)
Retrieve all parameters and descriptions for PWR command:
(HLP? "PWR")
ILF–ILS File
Gets or sets the active or specified channel intelligent lens system (ILS) file.
Parameters
• Access level: Installer
• Power level (minimum): Power Up
Commands
Command Description
ILF? Returns the ILS file in use by the system.
(Read-only)
ILF?L Returns a list of all available ILS files.
(Read-only)
ILF "<file>" Sets the active ILS file.
ILF+CHAN? Returns the ILS file used by the specified
"<channel>" channel. (Read-only)
CineLife+ Technical Reference–Serial Commands
020-103075-05 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
CineLife+ serial commands
Values
—
—
Values
—
—
file = Subject to the range returned in ILF?L
channel = Name of a valid channel
13