Service Guidelines; Ordering Parts; Replacing Modules; Observing Original Lead Dressing - Christie CP2420-Xe Service Manual

Service guidelines

Review safety guidelines and information required for replacing modules.

Ordering parts

When ordering replacement parts, quote the part numbers of the items required. Quote the projector
model number, serial number, and date of manufacture, as indicated on the license label.
Not all parts are available separately. In addition, some parts stocked as inventory are available only
while the current supply lasts.
All part numbers are subject to change.

Replacing modules

To ensure you have the correct module, check the module markings and parts lists. To ensure you
replace the projector module correctly, check the relevant disassembly and replacement procedures.
Replace components with exact equivalents or Christie-approved replacement parts. Failure to do so
may result in unsafe operation.

Observing original lead dressing

Before servicing, always carefully observe the original lead dress. Take extra precautions to secure all
harnessing properly, especially in the high voltage circuitry areas. Replace any wire that appears to
have damaged insulation.

Interconnection and line drawings

The interconnect diagram illustrates the path of electrical connections between modules.
Manufacturer's part numbers are included. Part numbers are subject to change.
Line drawings provide projector dimensions and sizes for installation.
To download the latest interconnect diagram or line drawings, visit www.christiedigital.com.
CP2420-Xe and CP4420-Xe Service Guide 10
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.