NEC Electra Elite IPK II System User Manual page 535

Electra Elite IPK II

20-13-06 Class of Service Options (Supplementary Service) – Automatic Off-Hook Signaling
(Automatic Override)
Program 20-02-03 and Program 20-13-06 set the conditions under which a Hotline, Reverse
Voice Over or DSS Console key indicates that an extension is busy. With condition 1 in the
following chart, the BLF LED is on only when both extension line appearances are busy. In
conditions 2~4, the BLF LED is on when one line appearance is busy.
1
BLF is on for extension receiving a voice announced Intercom call.

20-06-01 Class of Service for Extensions
Assign a Class of Service to an extension (1~15).

20-08-19 Class of Service Options (Outgoing Call Service) – Hot line for SPK
0 = Off
1 = On

20-11-06 Class of Service Options (Hold/Transfer Service) – Unscreened Transfer (Ring Inward
Transfer)
0 = Off
1 = On

20-11-11 Class of Service Options (Hold/Transfer Service) – Automatic On-Hook Transfer
0 = Off
1 = On

22-01-01 System Options for Incoming Calls – Incoming Call Priority
Determine if intercom calls or trunk calls have answer priority when both are ringing
simultaneously (0 = Intercom Call Priority, 1 = Trunk Call Priority). Refer to Program 15-02-22 for
light conditions.

30-05 DSS Console Lamp Table
If required, customize the system DSS Console flash rates. This table also affects DSS/Hotline
key lights for multiline terminals.
Hotline
Program 20-13-06
1 1
2 1
3 0
4 0
Program 20-02-03
0
1
0
1
Document Revision 4C
1
BLF Busy
Status Status
Off No
On Yes
On Yes
On Yes
2 - 511