Transferring Intercom Calls - NEC Electra Elite IPK II System User Manual

Electra Elite IPK II

Transferring Intercom Calls

To Transfer your Intercom call:
1. At the multiline terminal, press Hold.
- OR -
At single line telephone, hookflash.
2. Dial extension to receive your call.
If the extension is busy, does not answer or does not want the call, you can dial another extension number or

press the lit line key to return to the call. In addition, you may be able to hang up and have the call Camp-On.
Single line telephone users can retrieve the call by pressing hookflash. If a call has been transferred and the 500/

2500 user has hung up the handset, the call can be retrieved by dialing
had been transferred.
3. Announce your call and press Transfer (PRG 15-07 or SC 751: 06) or hang up.
With Automatic On-Hook Transfer

When you hang up, the call is automatically transferred.
Without Automatic On-Hook Transfer

You must press your Transfer Programmable Function Key to Transfer the call.
To Transfer the call unscreened, press your Transfer Programmable Function Key and hang up without making
an announcement.
Transferring a Call Into a Conference/Existing Call
1. While on a call, press Transfer and dial service code 624.
The display shows Transfer to Conf. ICM Dial.

2. Enter the extension number of the co-worker currently on a Conference call to which the call
should be transferred.
To cancel the transfer, press the flashing line key to retrieve the call.

If an error tone is heard, Barge-In is not enabled for the extension and the call does not go through . Retrieve the

call by pressing the flashing line key or hang up and the call recalls the extension.
3. The transferred call is incorporated into the conference call.
The callers hear the Barge-In tone if enabled in Program 20-13-17.

If a call is transferred into a Barge-In Conference (an existing 2-party call into which an extension user has used

the Barge-In feature to join), the Conference becomes a regular 4-party Conference call.
4. Hang up.
Transferring a Call to a Trunk Ring Group
1. While on a call, press Transfer.
2. Dial the Transfer to Ring Group service code defined in PRG 11-15-09.
You hear a confirmation tone.

Transfer
Document Revision 4C
and the extension number to which it

2 - 989