Call Forwarding - Centrex - NEC Electra Elite IPK II System User Manual

Electra Elite IPK II
Enhancements
This feature added with Version 1500.
Description
The Call Forwarding – Centrex feature allows a station to forward an incoming PBX/Centrex CO call to
an outside location using the same PBX/Centrex CO line to free the line for additional use.
Call Forwarding – Centrex supports the following:
Call Forward – Immediate

Call Forward – Busy

Call Forward – No Answer

Call Forward – Busy/No Answer

Conditions
Call Forwarding – Centrex calls transferred from another station are forwarded when the

transferred Trunk is assigned as PBX in Program 14-04-01.
The following incoming calls follow Call Forwarding – Centrex when the incoming trunk is a

PBX/Centrex trunk:
DIT/ANA

Station Transfer

Automated Attendant Transfer

DISA Calls

Call Forwarding – Centrex is not supported for Call Forward Both Ring Split.

A maximum of 24 digits can be assigned in the destination for Call Forwarding – Centrex.

When a trunk is set to CTX/PBX, and is set for Call Forwarding – Centrex to an incorrect

number, the call recalls and follows CO incoming ringing (i.e., DIL, Normal Ring Group
Programming).
When Call Forwarding – Centrex is set and all trunks are changed in PRG 14-04-01 from

PBX to Trunk, Call Forward is cleared from memory.
Call Forwarding – Centrex
Call Forwarding – Centrex
Document Revision 4C
2 - 127