NEC Electra Elite IPK II System User Manual page 809

Electra Elite IPK II
To display Caller ID for a call in Park:
 With Program 15-02-08 set to 0 (preselect) for this feature.
1. With Program 15-02-08 set to 0 (preselect) and a call in Park, press the Park key. (PRG 15-07 or
SC 752: 04).

- OR -
With Program 15-02-08 set to 1 (One-Touch), and a call in Park, press Feature, then the Park key
(PRG 15-07 or SC 752:
Call Park – Step Call:
To Park a call in the first available system orbit:
 You can Park Intercom or trunk calls.
1. Press Hold or Transfer.
2. Dial 6.
#
If you hear a busy tone, the orbit is busy. Proceed to step 3.

3. Dial .

Program 20-11-27 must be enabled in the Multiline Terminals Class of Service.

4. Press Speaker to hang up.
If not picked up, the call recalls to you.

- OR -
1. Press Hold or Transfer.
2. Press the DSS/BLF key programmed as
(The Park location is displayed in the LCD).
3. Press Speaker to hang up.
Park
04).

(Version 2000 or higher required)
6
#

Document Revision 4C
2 - 785