NEC Electra Elite IPK II System User Manual page 232

Document Revision 4C
Table 2-7 Class of Service Options (Outgoing Call Service), Program 20-08 (Continued)
Item
No.
05
Dial Number Preview (Preset Dial)
Turn off or on an extension user ability to use Dial
Number Preview.
06
Toll Restriction Override
Turn off or on Toll Restricting Override (Service Code
663).
07 Repeat Redial
Turn off or on an extension user ability to use Repeat
Redial.
08 Toll Restriction Dial Block
Turn off or on an extension user ability to use Dial Block.
09 Hotline/Extension Ringdown
Turn off or on Ringdown Extension for extensions with
this COS.
10 Signal/Voice Call
Turn off or on an extension user ability to force Handsfree
Answerback or Forced Intercom Ringing for outgoing
Intercom calls.
11 Protect for the Call Mode Switching from Caller
When an extension is set to ring mode for ICM calls,
enable this option to prevent a caller from changing the
call to voice announce mode.
12
Department Group Step Calling
Turn off or on an extension user ability to use Department
Group Step Calling.
13
ISDN CLIP
Determine if the ISDN calling line identity presentation
and screening indicators are allowed.
14 Call Address Information
15 Block Outgoing Caller ID
Turn off or on the system ability to automatically block
outgoing Caller ID information when a user places a call.
If this option is on, the system automatically inserts the
Caller ID block code
before the user dialed digits.
2 - 208
Item
67 (defined in PRG 14-01-21)

Electra Elite IPK II
Default
Input
Data COS COS
01~14
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
Related
Program
15
1
0 21-01-07,
21-07
11-11-36
1
0
0
1
0
1
0
0
0 14-01-20
14-01-21
Class of Service